Electronic 3D pen for kids


3D Pen with USB power supply is suitable for creative 3D shapes creation.
Thanks to its design, it is suitable for both right and left-handed users.
Let your child's imagination run wild. Just draw on paper and create 3D masterpieces.

Ultra lightweight, 65 g, ideal for children. The pen is lightweight, designer and has easier speed control.
It uses 1.75mm filament for drawing.

Instructions for use

• At the rear of the device you will find the power connector and the hole for inserting the string.
• The 3D pen must be permanently connected to a power source.
• For this purpose, a USB cable or an adapter to a power outlet is used.
• The filament passes through the string hole to the fusing head (nozzle), where it comes out again in the form of a melt.
• Some packages may include a storage stand.
• This is important because the pen tip often reaches temperatures in excess of 200 °C and can burn you.
• Therefore, the 3D pen should not be in the hands of children under 9 years of age.

With this model, you can use the buttons to adjust:

-the temperature of the jet head,
-the speed of the jetting of the fused string,
-more advanced devices display the selected parameters on the LCD screen .

1. Before drawing, start the device and let it warm up to the required temperature (usually a few tens of seconds).
2. Then insert the string - 3D pens use filaments with a diameter of 1.75 mm
3. The end of the filament must be straight, use ordinary scissors or cutters to align it.
4. Once inserted, slide the string towards the tip.
5. Once the molten plastic starts to flow out of the nozzle, pull the filament off and start drawing.
6. If you want to change the color of the 3D filament, "reverse" the old string before inserting the new filament.

Product Features:

• Material: ABS plastic.
• Packagecontents: 1 set (1*3D pen, 1*USB cable, 1*stand, consumables)
• Color: see picture
• Dimensions: 22*6 cm
• Heatingtemperature: 180 - 220 °C
• Nozzlediameter: 0.7 mm
• Filament: 1.75mm PLA/ABS
• Power supply: DC5V 2A
• USB cable:YES - included
• Warranty: 2 years
• Tags: electronic pen, 3D pen, pen for kids, kids toys